Ford A Pickup Restoration October 2005

My aim is to drive with the car in 2005, just with the frame and engine. Some parts like steering column etc. are still missing.

Brake and clutch pedal are mounted. For the clutch I have used a a longer release arm which reduced the needed force at the clutch pedal. That way it will be easier to change gears.

The brakes are mechanical ones and are activated with these cross shafts.

This is mounted at the bottom inside the steering column. I have modified it in order to install an O-ring. This is one of totally 4 modifications I will do to stop the oil leak.

The bushing is replaced and I have made new grooves.

This can be easily done with a Dremel.

A seat is also needed for driving. This is the one I have welded.

      Copyright ©  2001-2019 Markus Maurer - all rights reserved    |  Last modified: 23.12.2018  |  Print Page